Brother DR-510, Resetting drum (photoconductor)

Choose for which type of printer you want to perform the drum reset..

| Brother DCP | Brother HL | Brother MFC |
| Read comments | Leave your comment |

Brother
DCP-8040 | DCP-8040D | DCP-8045D | DCP-8045DN

1 – Open the front cover.

– Press the Delete / Back key.

2 – Press 1 to reset (if your Brother machine does not have a keypad, press the Up Arrow to zero the drum counter)
3 – Close the front cover.

| Read comments | Leave your comment |

Brother
HL-5140 | HL-5150D | HL-5150DLT | HL-5170D | HL-5170DN | HL-5170DNLT   

1 – Open the front cover.
2 – Press and hold the Go button for 4 seconds until all the LEDs light up.
3 – Once all the LEDs are on, release the Go button.

4 – Close the front cover.

| Read comments | Leave your comment |

Brother
MFC-8220 | MFC-8440 | MFC-8640D | MFC-8840 | MFC-8840D | MFC-8840DN

1 – Open the front cover.

– Press the Delete / Back key.

2 – Press 1 to reset (if your Brother machine does not have a keypad, press the Up Arrow to zero the drum counter)
3 – Close the front cover.

| Brother DCP | Brother HL | Brother MFC |
| Read comments | Leave your comment |

 Source of information: Service support, Brother & SCC & Uninet & Summit