Brother DR-1030, reset drum (photoconductor)

Choose for which type of printer you want to perform the drum reset..

| Brother DCP | Brother HL | Brother MFC |
| Read comments | Leave your comment |

Brother

DCP-1512 | DCP-1612

1. Press Menu..
2. Press the Up or Down arrow key to choose Machine Info.
3. Press OK.
4. Press the Up or Down arrow key to choose Reset Drum. 
5. Press OK for 3 seconds.
6. Press the Up arrow key to reset the drum unit counter.
7. Press Stop/Exit.

| Read comments | Leave your comment |

Brother
HL-1010 | HL-1112 | HL-1212W

1. Make sure that the machine is turned on.
2. Open the top cover.
3. To reset the drum counter, press Power 4 times.

4. Close the top cover. 
5. To reset the drum counter, press Power 4 times.

| Read comments | Leave your comment |

Brother
MFC-1810 | MFC-1910

1. Press Menu.
2. Press the Up or Down arrow key to choose Machine Info.
3. Press OK.
4. Press the Up or Down arrow key to choose Reset Drum.
5. Press OK for 3 seconds.
6. Press the Up arrow key to reset the drum unit counter.
7. Press Stop/Exit.

| Brother DCP | Brother HL | Brother MFC |
| Read comments | Leave your comment |

 Source of information: Service support, Brother & SCC & Uninet & Summit